Products

PRODUCT CENTER
undefined
undefined
+
  • undefined
  • undefined

钢球式软启动节能安全联轴器

该产品由联接主动端的转子体、联接从动端的法兰及尼龙柱销三部分组成,电机带动转子体内的叶轮,将钢球的离心力逐渐转化为与转子体内壁合金高耐磨层的最大静摩擦力矩,从而带动转子体旋转并通过柱销带动从动法兰完成节能软启的动力传递,具安全保护功能、免维护、易检查的电机软启动器。

Key words:

钢球式软启动节能安全联轴器

Classification:

Product Consulting:

  • Product Description
  •   该产品由联接主动端的转子体、联接从动端的法兰及尼龙柱销三部分组成,电机带动转子体内的叶轮,将钢球的离心力逐渐转化为与转子体内壁合金高耐磨层的最大静摩擦力矩,从而带动转子体旋转并通过柱销带动从动法兰完成节能软启的动力传递,具安全保护功能、免维护、易检查的电机软启动器。

      特性»»»

      ☆软启动性能好,可将电机的重载启动转化为空载启动,,实现机械软启功能,降低启动电流、减少启动能耗约65%。

      ☆免维护、寿命长、环保节能,除启动、制动阶段外,在正常运转中,主、从动端无转速差、无摩擦损耗,传动效率可达99%以上。

      ☆节省能源和设备费用,可以从根本上解决带载启动“大马拉小车”的不合理状况,既可降低电机容量,提高电网功率因数和电机效率,减少无功损耗,节约电能,又可以简化电机启动设备,降低设备费用。

      ☆轴系偏差的补偿及阻尼、调谐特性:主从动弹性联接系统组合可以补偿轴系偏差,减振降噪、防冲击、安装精度要求低。

      ☆m/p质量体积/功率比值小:重量体积小,转动惯量小,对轴系的附加弯矩小。

Previous: None

Next: None

More products

GTO series solid state coupling module energy saving safety coupling

GTO solid-state coupling module energy-saving safety coupling, suitable for mechanical equipment with load start-up, large starting inertia of working machine, difficult start-up, overload safety protection, frequent start-up without large-scale speed regulation. Such as drum induced draft fan, pump, oil field pumping unit, belt conveyor, scraper conveyor, stacker and reclaimer, ball mill, crusher, mineral powder sintering machine, air compressor, sand cleaning roller, crane walking mechanism, steel rolling mill pusher, boiler grate drive, etc.

STC series belt conveyor special low-speed diaphragm coupling

High strength, strong flexibility, good torsional rigidity, large carrying capacity, suitable for large equipment. The power/mass ratio is large, the precision is high, the dynamic balance performance is good, the additional load acting on the connecting equipment is small, and the vibration reduction effect is good. Low restoring force and strong ability to compensate for coupling deviation. Angular, radial and axial installation deviation can be compensated by flexible components. Can withstand -60 ℃ C- 350 ℃ high and low temperature, acid and alkali resistance, adapt to harsh working conditions. Good vibration damping mechanical characteristics, impact resistance, vibration absorption, noise reduction, so as to effectively improve the service life of the main and driven units. Independent structure of flexible (vulnerable) components; Maintenance-free, visible to the naked eye in use, easy to check, no replacement of the unit, greatly reducing labor intensity and small shutdown time of the unit equipment, greatly improving production efficiency.

D-ST(#)C Low Speed Heavy Duty Diaphragm Coupling

D-ST(#)C low-speed and heavy-duty diaphragm coupling is a high-damping flexible diaphragm assembly connected to the main and slave bushings or flanges, and the strength of the diaphragm assembly transmits torque and operates synchronously (rotation without clearance); At the same time, the elastic deformation of the diaphragm assembly meets the shafting deviation.

G-T drum elastic sleeve pin coupling

G-T the drum-shaped elastic sleeve coupling can be operated with load when overloaded, it is particularly suitable for the special safety and reliability requirements of drives, such as cable cranes and escalators. It is a flexible coupling with simple and compact structure, which can withstand alternating torque impact and load.

Get free product quotes

Our staff will contact you as soon as possible. If you need other services, please call the service hotline:13808048492
Submit